Patch cord Dintek CAT.6 UTP (1m-2m-3m-5mét)

Patch cord Dintek CAT.6 UTP (1m-2m-3m-5mét)

-         Patch Cord UTP Cat.6, 2 đầu đúc RJ45.

-         DINTEK PowerMAX Category 6 Patch Cords are specifically designed to support high speed data networks for 1000mb applications, and are fully tested to meet TIA/EIA Category 6 channel requirements. 

-         The patch cables are made from high quality shielded four pair 24AWG stranded wire.

-         DINTEK PowerMAX Category 6 Patch Cords are pre-terminated with RJ45 plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAX UTP products be used in a end-to-end system to maximize cabling performance.

Availability: In stock
Email to a Friend:

Description

FEATURES

–         Molded boots prevent pin from bending and cables from kinking

–         24AWG stranded wire provides maximum flexibility

–         Brilliant colors make management a snap

–         Fully tested to meet ANSI/TIA-568-C.2 category 6 requirement

–         The various colors are available to meet TIA/EIA-606 standards

–         The mechanical characteristics and transmission performance meet 16Mbps token Ring,10Base-T,100Base-T,155Mbps,622Mbps ATM,Gigabit-Ethernet and 1.2Gbps ATM requirements.

PHYSICAL CHARACTERISTICS 

–         Twisted pair color code:
         Pair 1> blue, white/blue ring.
         Pair 2> orange, white/orange ring
         Pair 3> green, white/green ring
         Pair 4> brown, white/brown ring 

–         Conductor: 24AWG (7×0.195mm) stranded anneal copper wire

–         Insulation material: HDPE

–         Diameter of dielectric core: 1.0±0.05mm

–         Insulation thickness: min at any point: 0.20mm

–         Number of twist pairs: 4 pairs  •  Assembly: 4 pairs of dielectric core shall be stranded in circular form  •  Material of jacket: PVC/LSZH  •  Thickness of jacket: AVG 0.66~0.70mm  •  Nominal O.D: 5.6±0.2mm  •  Jacket color: red,orange,yellow,green,blue,grey, etc

–         RJ45 plug:Housing>polycarbonate

–         Contact>copper alloy 50u” gold plated over nickel

–         Strength>20lbs. min

–         Durability>200 cycles min.

–         Insulation resistance: 500 megaohms min. Molded boots prevent pin from bending and cables from kink.

–         Wiring schemes: T568B

Applications 

–         Category 6  Products exceed all TIA  and ISO specifications for Category 5e/6 cabling systems and components

–         They have been Independently  confirmed for system performance

–         Meets FCC parts 68

–         ANSI/TIA-568-C.2

–         ISO/IEC 11801

–         DINTEK  Cat 6 products can  be warranted for 25 years

–         Cat6  products are Interoperable  with DINTEK and other standards  compliant products

–         Independently been confirmed for  Gigabit Ethernet applications

–         Having a single vendor solution  ensures best system performance

–         Our products meet or exceed  performance requirements for  existing and proposed high-speed  network applications including:

–         Voice; T1; ISDN

–         10BASE-T (IEEE 802.3)

–         16Mbps Token Ring (IEEE802.5) 

–         100VG-AnyLAN (IEEE802.12)

–         100BASE-T Ethernet (IEEE802.3)

–         155/622Mbps 1.2/2.4 Gbps ATM

–         1000Mbps Gigabit Ethernet

–         550MHz Broadband Video

STANDARDS

–         UL Verified

–         ISO/IEC11801 2nd edition

–         ANSI/TIA-568-C.2

–         CENELEC EN 50173

–         LSZH Flame test as per IEC 60332-1

–         Sản xuất tại Taiwan.

Reviews

There are no reviews yet.

Be the first to review “Patch cord Dintek CAT.6 UTP (1m-2m-3m-5mét)”

Your email address will not be published. Required fields are marked *

ĐT: 0818 42 43 43